Producer: ST-LAB

Description:

CI Express is the next revolution in I/O interconnect standards that will deliver the bandwidth and
features required by PCs, consumer electronics and communications devices.

The architecture is a cost-effective, low-pin count, and point-to-point technologies offering maximum
bandwidth, reducing cost and design complexity and enabling smaller form factors.

This card is the best solution for Gigabit Ethernet PCI Express and the interface has a potential
transfer rates of 2.5 Gbps using a four-lane (or x4) PCI Express link.

This card is a 4-Port Gigabit Ethernet PCI Express Card, which is specifically designed to plug into
a desktop equipped with an available x4, x8 or x16 PCI Express slot.

It comes with a comprehensive of software drives for all desktop operating systems, including
Microsoft Windows and Linux.

Features

Add four 10Mbps/100Mbps/1G compatible   RJ-45 Ethernet ports

Designed to meet PCI Express Specification   Revision 2.0

Four-lane (or x4) PCI Express compatible   with x4, x8 and x16 PCI Express slots

Fully Compliant with IEEE 802.3, IEEE   802.3u, IEEE 802.3ab

Supports 10/100/1000M data   auto-negotiation

Automatic MDI/MDIX crossover at all speeds

Up to 9K jumbo frame support

Support Wake On Lan (WOL) power management

Feature full duplex mode that doubles the   network connections speed

System Requirements

Windows 7/8.x/10/11, Linux

PCI   Express x4, x8 or x16 slots

Package Contents

1 x 4-Port   Gigabit Ethernet PCIe Card

1 x User   Manual

Download driver from ST-LAB website – here

הפוסט PCIe 4-Port Gigabit Network Controller Card הופיע ראשון בNBtech Group

Producer: ST-LAB

Description:

PCI Express is the next revolution in I/O interconnect standards that will deliver the bandwidth
and features required by PCs, consumer electronics and communications devices.

The architecture is a cost-effective, low-pin count, and point-to-point technologies offering maximum
bandwidth, reducing cost and design complexity and enabling smaller form factors.

This card is the best solution for Gigabit Ethernet PCI Express and the interface has a potential transfer
rate of 2.5 Gbps using a single-lane (or x1) PCI Express link.

This card is a 2-Port Gigabit Ethernet PCI Express Card, which is specifically designed to plug into a
desktop equipped with an available x1, x4, x8 or x16 PCI Express slot.

It supports high performance dual channel networking and full duplex communication to achieve up to
2000 Mbps and fast transfer rates, yet is compatible with existing Ethernet.

It comes with a comprehensive of software drives for all desktop operating systems, including Microsoft
Windows and Linux.

Features

Designed to meet PCI Express Specification Revision 2.1

Single-lane (or x1) PCI Express throughput supports rate of 2.5Gbps

Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Supports 10/100/1000M data auto-negotiation

Automatic MDI/MDIX crossover at all speeds

Up to 9K jumbo frame support

Supports Wake On Lan (WOL) power management

Features full duplex mode that doubles the network connections speed

System Requirements

Windows 7/8.x/10/11, Windows Server 2008 R2/2012 R2/2016/2019

Linux 2.6.x or later

PC with one free PCIe slot

Package Contents

1 x 2-Port Gigabit Ethernet PCIe Card

1 x User Manual

Download driver from ST-LAB website – here

הפוסט PCIe Dual Ports LAN Card הופיע ראשון בNBtech Group

2 x DB9 male serial connectors
Data transfer rate up to 230400bps

Specification:

Chipset:OXPCIe952-FBAG TFBGA 120Pin

* Compliant with PCI Power Management 1.2

* Supports 2x UART serial ports

* Built-in 16C950 compatible UART

* 128-byte deep transmit/receive FIFOs

* Data transfer rate up to 230400bps

Connectors: 2 x DB9 male serial connectors

System Requirements:

* Windows 2000, XP/2003/Vista/7/8.x/10 (32/64 bit)

* PCI Express-enabled system with an available PCI Express slot

* Download driver from ST-LAB website – here

Accessories:

1 x User’s Manual

1 x Driver CD

הפוסט PCI-E 2S Serial Card הופיע ראשון בNBtech Group

ST-N-314 is a 10/100/1000M Gigabit Ethernet PCI Express Card. It provides throughput and
connectivity at gigabit speeds up to 1000 Mbps (1Gbps) raw bandwidth.

This NIC Card equips high quality Realtek8111H chipset which is optimized for maximum
throughput and low CPU utilization solution. It can support Microsoft Windows OS, Windows
Server OS and Linux OS.

:Features

Single-lane (or x1) PCI Express throughput supports rate of 2.5Gbps

Designed to meet PCI Express Specification Revision 1.1a

Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

10/100/1000M data auto-negotiation

LEDs indicate the status of data transmission

Support Wake on Lan (WOL) power management (optional)

Feature full duplex mode that doubles the network connections speed

:System Requirements

Windows 2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2/8/Server 2012/8.1/
Server 2012 R2/10 32/64 bit

PCI Express-enabled system with an available PCI Express slot

Download driver from ST-LAB website – here

:Accessories

1 x Driver CD

1 x User Manual

Download driver here

הפוסט PCIe Gigabit Ethernet – 1Port Card הופיע ראשון בNBtech Group

Producer: ST-LAB

Color: Silver

Product Information :

Super-Speed USB3.0 interface is the next revolution in I/O interconnect standards that will deliver
the bandwidth and features required by PCs, consumer electronics and communications devices.

With 10 times faster throughput than USB2.0 standard and backward compatible with current USB
device features, USB3.0 interface will be the trendy of IT technology.

This board is a 4 port Super-Speed USB3.0 PCI Express card.

It is compliant with the PCI Express Generation 2 specification for host PC system.

It works up to 5 Gbps for data transfer when connecting to USB3.0 compliant peripherals, while
maintaining compatibility with existing USB peripheral devices.

This board supports USB3.0 High-Speed device and backward compatible with current USB2.0
High-Speed and USB1.1 Full-Speed device.

It is an ideal choice for external storage devices, MP3 players, external DVD Writer, Card Readers,
digital cameras, webcams, networking, video devices, and all other USB devices.

Features

Fully compliant with PCI Express Base Specification Revision 2.0

Support USB Battery Charging Specification Revision 1.2

Single-lane (x1) PCI Express throughput rates up to 5 Gbps

Compliant with Universal Serial Bus3.0 specification Revision 1.0

Supports simultaneous operation of multiple USB3.0, USB2.0 and USB1.1 devices

Supports the following speed data rates as follows:

Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed (480Mbps) / Super-speed (5Gbps)

Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification Revision 1.0

Supports 4 downstream ports for all speeds

Built-in 4-pin power connector for receiving extra power supply from system

Supports USB Battery Charging Specification Revision 1.2

Hot-swapping feature allows you to connect/disconnect devices without powering down the system

System Requirements

Windows XP/Vista/7/8/8.1/10 (32/64 bit); Linux 2.6.31 or later

One available PCI Express slot (Recommend PCI Express 2.0)

Package

1 x USB 3.0 4-Port PCI Express Card

1 x Driver CD

1 x User Manual

Download driver from ST-LAB website – here

הפוסט ST-LAB PCIe USB3.0 – 4Port Card הופיע ראשון בNBtech Group

The card allows users to expand an additional LPT port and two Serial port on PC-based systems to connect their devices.

The card is used for business automation and is also ideal for home or office users.

Features:

Compliant with PCIe 2.0 Gen 1

Compatible with IEEE 1284 –SPP/Byte/ECP Mode

Add one IEEE1284 Parallel port on system

Serial data transfer rate up to 921600bps

Supports 2 x UART serial port

Parallel data transfer rate up to 190KB/s

PCI-Express x1

1 x DB25 female connector

2 x DB9 male serial connectors

System Requirements

Windows XP/Vista/7/8.x/10 (32/64 bit),

Linux 2.6.32 or later

One available PCI Express slot

Download driver from ST-LAB website – here

Package Contents:

1 x PCIe 2-Port Serial +1 Port Parallel Card

1 x User Manual

הפוסט PCIe 2S + 1P Card הופיע ראשון בNBtech Group

Producer: ST-LAB

Description:

This card is a Multi-Gigabit network adapter that runs on a high speed PCIe x4 host but interface.

This card hosts the Tehuti new 3rd generation TN4010 controller, and optimized 10 Gigabit Ethernet
MAC designed for low-power, low-cost, single-port connectivity required by Application Servers and
Workstations. The TN4010 MAC is paired with Marvell Alaska 88X3310P transceiver, a low-power,
high-performance 10 Gigabit Ethernet PHY, to enable five-speed connectivity (10GBase-T, 5GBase-T
2.5GBase-T 1000Base-T, and 100Base-TX) over low-cost  standard CAT-6a Ethernet cabling, up to
100m (Cat-5e and CAT-6 are supported compliant to Link Segment specifications).

This combination creates a new gateway to cost-conscious consumer applications, as well as to
intensive data environments.

Features

Supports 10G/5G/2.5G/1G/100M

Runs up to 10G at 100m Cat 6A cable and 5G at 100m Cat 5e/Cat 6 cable

Backward compatibility with 1000Base-T, 100Base-T Networks

PCI Express Gen-2 x4 Host Bus interface

EEE (Energy Efficient Ethernet)

9K Jumbo Frames

IP, TCP, UDP checksum offloading

IEEE 802.1Q Tagged VLAN

Virtual NIC support

Reduced CPU utilization and improved throughput

Requirements

Hardware

The following system specs are recommended minimum

PCIe slot: Available 4-Lanes PCI-Express slot gen 2.0 or later

Processor: Quad Core 3.0GHz or higher

RAM: 4GB memory or higher

Software

Operating systems supported are (both 32 and 64 bits)

Windows 7

Windows Server 2008 R2

Windows Server 2012

Windows 8.1

Windows Server 2012 R2

Windows 10

Linux 2.6.24 or later

VMware ESXi 5.x/6.0

Mac OS X 10.12.6 or later

Package Contents

1 x PCIe 10G 5-Speed Multi-Gigabit Network Card

1 x Driver CD

1 x User Manual

Download driver from ST-LAB website – here

הפוסט PCIe 10G 5-Speed Multi-Gigabit Network Card הופיע ראשון בNBtech Group

Producer: ST-LAB

Color: Silver

Specification:

The PCIe 2.5G Network Adapter supports data rate up to 2.5Gbps.

It will increase business efficiency by increasing the network speed and greatly reduce file transfer time between
networked devices in a home environment, where video streaming over the network is becoming commonplace.

Features

Supports PCI Express 2.1

Supports 10/100/1000/2500 Mbps Ethernet

Supports WOL

Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

LEDs indicate the status of including Link/Activity (Green)

Systems Requirements

Operating systems supported are (both 32 and 64 bits)

Windows 7/8.x/10

Windows Server 2008 R2/2012R2/2016

Linux 4.x or later

Package Contents

1 x PCIe 2.5G 4-Speed Multi-Gigabit Network Card

1 x User Manual

Download driver from ST-LAB website – here

הפוסט ST-LAB PCIe 2.5G 4-Speed Gigabit Network Adapter הופיע ראשון בNBtech Group

Expands 8 independent RS-232 serial ports with communications speeds up to 230Kbps.
With highly reliable Exar native PCI Express 16550 UART controller.\

Overview:

RS-232 I/O series, a line of PCI Express Multi-port Serial Communication Board, is designed to meet
PCI Express Base Specification V2.0.
It can be installed in virtually any available PC system and compatible with all major operating systems.
Users do not need to manually set jumpers to configure I/O addresses and IRQ locations.

This board offer independent serial ports for connecting terminals, modems, printers, scanners, cash
registers, bar code readers, keypads, numeric displays, electrical scales, data acquisition equipment,
and other serial devices for the PC and compatible systems. This board offers a reliable and high
performance solution for serial multi-port communications.

Features:

• PCIe 2.0 Gen 1 compliant
• Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys
• Expands 8 independent RS-232 serial ports with communications speeds up to 230Kbps
• With highly reliable Exar native PCI Express 16550 UART controller
• 256-bype deep transmit/receive FIFOs
• Installs in standard height or low profile chassis with included bracket
• Plug-n-Play, I/O address and IRQ assigned by BIOS
   

  
  System Requirements:

• Windows® XP/Vista/7/8/8.1/10 (32/64 bit), Linux 2.6.31 or later
• One available PCI Express x1, x4, x8 or x16 slot
• Download driver from ST-LAB website – here

Package Contents:

• 1 x 8-Port RS-232 PCIe Card
• 1 x Driver CD
• 1 x User Manual
• 1 x Fan Out Cable
• 1 x Spare low profile bracket

Note: Contents may vary depending on country/market.

הפוסט PCIe 8Ports Serial Controller Card הופיע ראשון בNBtech Group

Compliant with PCI Express Base Specification 1.1

Supports 6 x UART serial port

Built-in 16C450/550 compatible UART

Features:

* Compliant with PCI Express Base Specification 1.1

* Supports 6 x UART serial port

* Built-in 16C450/550 compatible UART

* On chip 256 byte FIFOs in transmit and receive path of each serial port

* Data transfer rate up to 230400bps

Bus: PCI-Express x1

Connectors: 6 x DB9 male serial connectors

System Requirements:

* Windows XP/Vista/7/8.1/10/11 (32/64 bit)

* PCI Express-enabled system with an available PCI Express slot

* Download driver from ST-LAB website – here

Accessories:

* 2 x Bracket with two DB9 male serial ports

* 1 x Driver CD

* 1 x User Manual

הפוסט PCI-E 6S Serial Card הופיע ראשון בNBtech Group